Spantec produce a range of brackets that allow a very large number of floor and roof configurations to be assembled. The standard brackets below are typically used for floor frames in decks, ground and upper floors. The arrangement of the brackets are outlined in the ‘Connection & Installation Details’ section of Boxspan Residential Span Tables. The brackets are supplied to suit the different Boxspan depths as well as a range of angles.
Boxspan structural brackets are made from zinc coated G2 grade steel complying with (AS1397/G2 Z450) and AS/NZS 1365:1996. Base metal thicknesses (BMT) of the brackets range from 0.9mm – 1.55mm.
Click on the drawing to see the standard ground floor bracket connections.
To fix two Boxspan beams together. Typically in-plane joists to bearer.
Available Sizes:
FB100
FB150
FB200
FB250
To close off ends of beams or join two beams together over a support.
Available Sizes:
IEC100
IEC150
IEC200
IEC250
Used to screw fix joists down to under bearer or wall plate under.
Available Sizes:
TH100
TH150
TH200
TH250
Fixing beams at 45° angle to main beam such joists to perimeter bearers.
Available Sizes:
MFB100
MFB150
MFB200
MFB250
Joins two beams together at 45°/135° over a support. i.e. perimeter bearers.
Available Sizes:
IBB100
IBB150
IBB200
IBB250
Fixing two laminated joists, bearers into a beam at a 90° angle.
Available Sizes:
FBD100
FBD150
FBD200
FBD250
Supports double bearers at a 45° angle for mitred deck corners.
Code:
DCB
Supports double bearers at a 45° angle for internal mitred deck corners.
Code:
IDCB
-or- Get a quote
Privacy Policy | Terms of Use
Boxspan®, Colorbeam®, Ezipier™ and Ezibrace™ are trademarks of Spantec Systems.
© 2019 Spantec Systems Pty Ltd. All Rights Reserved.
